- All
- SANTAK Lingju 3.0 Pro Micro Module Integrated data
- SANTAK Lingju 2.0 Aisle Micro Modular Data Center
- SANTAK Power UPS SPU Series (1-20KVA)
- SANTAK UPS CASTLE M PLUS Industrial Series
- SANTAK UPS CASTLE series C1-10K
- SANTAK UPS CASTLE series 3C10-20K
- SANTAK UPS CASTLE G7 series C1-3K
- SANTAK UPS PT3000 LoT series PT1-3K
- SANTAK UPS PT3000 UL series PT1-3K
- SANTAK UPS PT3000 series PT1-20K
- SANTAK UPS CASTLE 3C3 HD Series 20-600kVA
- SANTAK UPS Industrial UPS SIU series (10-200KVA)
- SANTAK UPS ARRAY 3A3 PT series (25-200KVA)
- SANTAK UPS ARRAY 3A3 PT series (60-600KVA)
- SANTAK UPS CASTLE 3C3 PRO Series 20-200kVA
- SANTAK UPS CASTLE 3C3 PRO ISO Series 15-200kVA St
- SANTAK Castle(SCC)Series High efficiency computer
- SANTAK Castle (SCC)Series Fixed frequency small pr
- SANTAK Castle (SCC)Series Fully variable frequency
- SANTAK castle C12-P SERIE Valve regulated sealed l
- SANTAK castle C12 SERIE Battery UPS dedicated valv
- SANTAK ARRAY SERIE High power and long float charg
- SANTAK G SERIE Colloidal battery 12V valve regulat
- SANTAK UPS MT Series
- SANTAK UPS K Series
- SANTAK UPS TG BOX Series
- SANTAK UPS TG Series
- SANTAK Accessories
Santak PT3000 Lingxiao UPS: Online double-conversion (95%-96% efficiency), PF=1 boosts 30% load. Supports 3-in-1-out/3-in-3-out configurations. Conformal coating for 50℃/seismic, 2U compact design with drycontact/RS232/USB remote control.
SANTAK online ups PT10K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 10kVA/10kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）,Output power factor was PF = 1,Output wavefor
SANTAK online ups PT10KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 10kVA/10kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）,Output power factor was PF = 1,Output wavefor
SANTAK online ups PT10KS31,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output&three-phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 10kVA/10kW,Input method was Single phase two-wire+grounded (L+N+PE)/three-phase five wire (L1/L2/L3/N/G).Rated voltage was Single phase220V/230V/240V，three-phase380V/400V/415V.Input Voltage was Single phase110VAC~275VAC，three-phase191VAC~476VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was Single phase110VAC~275VAC，three-phase191VAC~476VAC,Output voltage was 220V/230V/240V,Output accuracy was ± 1 %,Output Connection was Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (batter
SANTAK online ups PT15KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output&three-phase input, single-phase output&three-phase input, three-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 15kVA/15kW,Input method was Single phase two-wire+grounded (L+N+PE)/three-phase five wire (L1/L2/L3/N/G).Rated voltage was Single phase220V/230V/240V，three-phase380V/400V/415V.Input Voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Output voltage was Single phase220V/230V/240V，three-phase380V/400V/415V,Output accuracy was ± 1 %,Output Connection was Output terminal block,Outp
SANTAK online ups PT20KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output&three-phase input, single-phase output&three-phase input, three-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 20kVA/20kW,Input method was Single phase two-wire+grounded (L+N+PE)/three-phase five wire (L1/L2/L3/N/G).Rated voltage was Single phase220V/230V/240V，three-phase380V/400V/415V.Input Voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Output voltage was Single phase220V/230V/240V，three-phase380V/400V/415V,Output accuracy was ± 1 %,Output Connection was Output terminal block,Outp
SANTAK online ups PT1K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 1000VA/1000W,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 200/208/220/230/240V（Voltage can be set）.Input Voltage was 100VAC-276VAC,Input frequency was 40~70Hz,THDI was < 5% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 200/208/220/230/240V（Voltage can be set）,Output accuracy was ± 1 %,Output Connection was Main output (4*IEC C13) Partition control output (2*IEC C13)/(2*IEC C13),Output frequency range (mains mode) was 50 或 60Hz，Automatic sensing or can be set to a fixed frequency output,Output frequency range (battery mode) was 50 或 60Hz，Au
SANTAK online ups PT2.2K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 2200VA/2200W,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 200/208/220/230/240V（Voltage can be set）.Input Voltage was 100VAC-276VAC,Input frequency was 40~70Hz,THDI was < 5% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 200/208/220/230/240V（Voltage can be set）,Output accuracy was ± 1 %,Output Connection was Main output (1*IEC C19+4*IEC C13) Partition control output (1*IEC C19+2*IEC C13)/(2*IEC C13),Output frequency range (mains mode) was 50 或 60Hz，Automatic sensing or can be set to a fixed frequency output,Output frequency range (battery
SANTAK online ups PT3K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 3000VA/3000W,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 200/208/220/230/240V（Voltage can be set）.Input Voltage was 100VAC-276VAC,Input frequency was 40~70Hz,THDI was < 5% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 200/208/220/230/240V（Voltage can be set）,Output accuracy was ± 1 %,Output Connection was Main output (1*IEC C19+4*IEC C13) Partition control output (1*IEC C19+2*IEC C13)/(2*IEC C13),Output frequency range (mains mode) was 50 或 60Hz，Automatic sensing or can be set to a fixed frequency output,Output frequency range (battery mo
wind power generation UPS6kVA/6kW
SANTAK wind power generation UPS PT6K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 6kVA/6kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）,Output power factor was PF = 1,Ou
wind power generation UPS6kVA/6kW
SANTAK wind power generation UPS PT6KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 6kVA/6kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）,Output power factor was PF = 1,Ou
wind power generation UPS10kVA/10kW
SANTAK wind power generation UPS PT10K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 10kVA/10kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）,Output power factor was PF = 1
wind power generation UPS10kVA/10kW
SANTAK wind power generation UPS PT10KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 10kVA/10kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）,Output power factor was PF = 1
wind power generation UPS10kVA/10kW
SANTAK wind power generation UPS PT10KS31,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output&three-phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 10kVA/10kW,Input method was Single phase two-wire+grounded (L+N+PE)/three-phase five wire (L1/L2/L3/N/G).Rated voltage was Single phase220V/230V/240V，three-phase380V/400V/415V.Input Voltage was Single phase110VAC~275VAC，three-phase191VAC~476VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was Single phase110VAC~275VAC，three-phase191VAC~476VAC,Output voltage was 220V/230V/240V,Output accuracy was ± 1 %,Output Connection was Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequenc
wind power generation UPS15kVA/15kW
SANTAK wind power generation UPS PT15KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output&three-phase input, single-phase output&three-phase input, three-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 15kVA/15kW,Input method was Single phase two-wire+grounded (L+N+PE)/three-phase five wire (L1/L2/L3/N/G).Rated voltage was Single phase220V/230V/240V，three-phase380V/400V/415V.Input Voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Output voltage was Single phase220V/230V/240V，three-phase380V/400V/415V,Output accuracy was ± 1 %,Output Connection was Output term
wind power generation UPS20kVA/20kW
SANTAK wind power generation UPS PT20KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output&three-phase input, single-phase output&three-phase input, three-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 20kVA/20kW,Input method was Single phase two-wire+grounded (L+N+PE)/three-phase five wire (L1/L2/L3/N/G).Rated voltage was Single phase220V/230V/240V，three-phase380V/400V/415V.Input Voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Output voltage was Single phase220V/230V/240V，three-phase380V/400V/415V,Output accuracy was ± 1 %,Output Connection was Output term
wind power generation UPS1000VA/1000W
SANTAK wind power generation UPS PT1K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 1000VA/1000W,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 200/208/220/230/240V（Voltage can be set）.Input Voltage was 100VAC-276VAC,Input frequency was 40~70Hz,THDI was < 5% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 200/208/220/230/240V（Voltage can be set）,Output accuracy was ± 1 %,Output Connection was Main output (4*IEC C13) Partition control output (2*IEC C13)/(2*IEC C13),Output frequency range (mains mode) was 50 或 60Hz，Automatic sensing or can be set to a fixed frequency output,Output frequency range (battery mode) w
wind power generation UPS2200VA/2200W
SANTAK wind power generation UPS PT2.2K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 2200VA/2200W,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 200/208/220/230/240V（Voltage can be set）.Input Voltage was 100VAC-276VAC,Input frequency was 40~70Hz,THDI was < 5% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 200/208/220/230/240V（Voltage can be set）,Output accuracy was ± 1 %,Output Connection was Main output (1*IEC C19+4*IEC C13) Partition control output (1*IEC C19+2*IEC C13)/(2*IEC C13),Output frequency range (mains mode) was 50 或 60Hz，Automatic sensing or can be set to a fixed frequency output,Output frequency
wind power generation UPS3000VA/3000W
SANTAK wind power generation UPS PT3K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 3000VA/3000W,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 200/208/220/230/240V（Voltage can be set）.Input Voltage was 100VAC-276VAC,Input frequency was 40~70Hz,THDI was < 5% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 200/208/220/230/240V（Voltage can be set）,Output accuracy was ± 1 %,Output Connection was Main output (1*IEC C19+4*IEC C13) Partition control output (1*IEC C19+2*IEC C13)/(2*IEC C13),Output frequency range (mains mode) was 50 或 60Hz，Automatic sensing or can be set to a fixed frequency output,Output frequency ra
PCS-EMS control system for energy storage power station UPS6kVA/6kW
SANTAK PCS-EMS control system for energy storage power station UPS PT6K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 6kVA/6kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）
PCS-EMS control system for energy storage power station UPS6kVA/6kW
SANTAK PCS-EMS control system for energy storage power station UPS PT6KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 6kVA/6kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）
PCS-EMS control system for energy storage power station UPS10kVA/10kW
SANTAK PCS-EMS control system for energy storage power station UPS PT10K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 10kVA/10kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear lo
