SANTAK UPS PT3000 series PT1-20K

Outdoor communication base station UPS10kVA/10kW

SANTAK Outdoor communication base station UPS PT10KS31,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output&three-phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 10kVA/10kW,Input method was Single phase two-wire+grounded (L+N+PE)/three-phase five wire (L1/L2/L3/N/G).Rated voltage was Single phase220V/230V/240V，three-phase380V/400V/415V.Input Voltage was Single phase110VAC~275VAC，three-phase191VAC~476VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was Single phase110VAC~275VAC，three-phase191VAC~476VAC,Output voltage was 220V/230V/240V,Output accuracy was ± 1 %,Output Connection was Output terminal block,Output frequency range (mains mode) was 46-54Hz,Ou

Outdoor communication base station UPS15kVA/15kW

SANTAK Outdoor communication base station UPS PT15KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output&three-phase input, single-phase output&three-phase input, three-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 15kVA/15kW,Input method was Single phase two-wire+grounded (L+N+PE)/three-phase five wire (L1/L2/L3/N/G).Rated voltage was Single phase220V/230V/240V，three-phase380V/400V/415V.Input Voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Output voltage was Single phase220V/230V/240V，three-phase380V/400V/415V,Output accuracy was ± 1 %,Output Connection wa

Outdoor communication base station UPS20kVA/20kW

SANTAK Outdoor communication base station UPS PT20KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output&three-phase input, single-phase output&three-phase input, three-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 20kVA/20kW,Input method was Single phase two-wire+grounded (L+N+PE)/three-phase five wire (L1/L2/L3/N/G).Rated voltage was Single phase220V/230V/240V，three-phase380V/400V/415V.Input Voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Output voltage was Single phase220V/230V/240V，three-phase380V/400V/415V,Output accuracy was ± 1 %,Output Connection wa

Outdoor communication base station UPS1000VA/1000W

SANTAK Outdoor communication base station UPS PT1K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 1000VA/1000W,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 200/208/220/230/240V（Voltage can be set）.Input Voltage was 100VAC-276VAC,Input frequency was 40~70Hz,THDI was < 5% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 200/208/220/230/240V（Voltage can be set）,Output accuracy was ± 1 %,Output Connection was Main output (4*IEC C13) Partition control output (2*IEC C13)/(2*IEC C13),Output frequency range (mains mode) was 50 或 60Hz，Automatic sensing or can be set to a fixed frequency output,Output frequency range (ba

Outdoor communication base station UPS2200VA/2200W

SANTAK Outdoor communication base station UPS PT2.2K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 2200VA/2200W,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 200/208/220/230/240V（Voltage can be set）.Input Voltage was 100VAC-276VAC,Input frequency was 40~70Hz,THDI was < 5% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 200/208/220/230/240V（Voltage can be set）,Output accuracy was ± 1 %,Output Connection was Main output (1*IEC C19+4*IEC C13) Partition control output (1*IEC C19+2*IEC C13)/(2*IEC C13),Output frequency range (mains mode) was 50 或 60Hz，Automatic sensing or can be set to a fixed frequency output,Outp

Outdoor communication base station UPS3000VA/3000W

SANTAK Outdoor communication base station UPS PT3K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 3000VA/3000W,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 200/208/220/230/240V（Voltage can be set）.Input Voltage was 100VAC-276VAC,Input frequency was 40~70Hz,THDI was < 5% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 200/208/220/230/240V（Voltage can be set）,Output accuracy was ± 1 %,Output Connection was Main output (1*IEC C19+4*IEC C13) Partition control output (1*IEC C19+2*IEC C13)/(2*IEC C13),Output frequency range (mains mode) was 50 或 60Hz，Automatic sensing or can be set to a fixed frequency output,Output

Outdoor signal and data acquisition UPS6kVA/6kW

SANTAK Outdoor signal and data acquisition UPS PT6K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 6kVA/6kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）,Output power facto

Outdoor signal and data acquisition UPS6kVA/6kW

SANTAK Outdoor signal and data acquisition UPS PT6KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 6kVA/6kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）,Output power facto

Outdoor signal and data acquisition UPS10kVA/10kW

SANTAK Outdoor signal and data acquisition UPS PT10K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 10kVA/10kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）,Output power fa

Outdoor signal and data acquisition UPS10kVA/10kW

SANTAK Outdoor signal and data acquisition UPS PT10KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 10kVA/10kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）,Output power fa

Outdoor signal and data acquisition UPS10kVA/10kW

SANTAK Outdoor signal and data acquisition UPS PT10KS31,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output&three-phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 10kVA/10kW,Input method was Single phase two-wire+grounded (L+N+PE)/three-phase five wire (L1/L2/L3/N/G).Rated voltage was Single phase220V/230V/240V，three-phase380V/400V/415V.Input Voltage was Single phase110VAC~275VAC，three-phase191VAC~476VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was Single phase110VAC~275VAC，three-phase191VAC~476VAC,Output voltage was 220V/230V/240V,Output accuracy was ± 1 %,Output Connection was Output terminal block,Output frequency range (mains mode) was 46-54Hz,

Outdoor signal and data acquisition UPS15kVA/15kW

SANTAK Outdoor signal and data acquisition UPS PT15KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output&three-phase input, single-phase output&three-phase input, three-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 15kVA/15kW,Input method was Single phase two-wire+grounded (L+N+PE)/three-phase five wire (L1/L2/L3/N/G).Rated voltage was Single phase220V/230V/240V，three-phase380V/400V/415V.Input Voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Output voltage was Single phase220V/230V/240V，three-phase380V/400V/415V,Output accuracy was ± 1 %,Output Connection

Outdoor signal and data acquisition UPS20kVA/20kW

SANTAK Outdoor signal and data acquisition UPS PT20KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output&three-phase input, single-phase output&three-phase input, three-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 20kVA/20kW,Input method was Single phase two-wire+grounded (L+N+PE)/three-phase five wire (L1/L2/L3/N/G).Rated voltage was Single phase220V/230V/240V，three-phase380V/400V/415V.Input Voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was Single phase100VAC~300VAC，three-phase173VAC~520VAC,Output voltage was Single phase220V/230V/240V，three-phase380V/400V/415V,Output accuracy was ± 1 %,Output Connection

Outdoor signal and data acquisition UPS1000VA/1000W

SANTAK Outdoor signal and data acquisition UPS PT1K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 1000VA/1000W,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 200/208/220/230/240V（Voltage can be set）.Input Voltage was 100VAC-276VAC,Input frequency was 40~70Hz,THDI was < 5% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 200/208/220/230/240V（Voltage can be set）,Output accuracy was ± 1 %,Output Connection was Main output (4*IEC C13) Partition control output (2*IEC C13)/(2*IEC C13),Output frequency range (mains mode) was 50 或 60Hz，Automatic sensing or can be set to a fixed frequency output,Output frequency range (

Outdoor signal and data acquisition UPS2200VA/2200W

SANTAK Outdoor signal and data acquisition UPS PT2.2K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 2200VA/2200W,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 200/208/220/230/240V（Voltage can be set）.Input Voltage was 100VAC-276VAC,Input frequency was 40~70Hz,THDI was < 5% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 200/208/220/230/240V（Voltage can be set）,Output accuracy was ± 1 %,Output Connection was Main output (1*IEC C19+4*IEC C13) Partition control output (1*IEC C19+2*IEC C13)/(2*IEC C13),Output frequency range (mains mode) was 50 或 60Hz，Automatic sensing or can be set to a fixed frequency output,Ou

Outdoor signal and data acquisition UPS3000VA/3000W

SANTAK Outdoor signal and data acquisition UPS PT3K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 3000VA/3000W,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 200/208/220/230/240V（Voltage can be set）.Input Voltage was 100VAC-276VAC,Input frequency was 40~70Hz,THDI was < 5% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 200/208/220/230/240V（Voltage can be set）,Output accuracy was ± 1 %,Output Connection was Main output (1*IEC C19+4*IEC C13) Partition control output (1*IEC C19+2*IEC C13)/(2*IEC C13),Output frequency range (mains mode) was 50 或 60Hz，Automatic sensing or can be set to a fixed frequency output,Outp

santak UPS PT6K 6kVA/6kWOnline (dual conversion)

santak UPS PT6K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 6kVA/6kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）,Output power factor was PF = 1,Output waveform was Pure

santak UPS PT6KS 6kVA/6kWOnline (dual conversion)

santak UPS PT6KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 6kVA/6kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）,Output power factor was PF = 1,Output waveform was Pure

santak UPS PT10K 10kVA/10kWOnline (dual conversion)

santak UPS PT10K,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Standard model (with built-in battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 10kVA/10kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）,Output power factor was PF = 1,Output waveform was P

santak UPS PT10KS 10kVA/10kWOnline (dual conversion)

santak UPS PT10KS,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 10kVA/10kW,Input method was Single phase two-wire+grounded (L+N+PE).Rated voltage was 208/220/230/240VAC.Input Voltage was 110VAC-275VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was 187VAC～264VAC,Output voltage was 208/220/230/240VAC,Output accuracy was ± 1 %,Output Connection was IEC C13*2+Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode) was 50/60Hz±0.1Hz,Peak output current ratio was 3:1,Output waveform distortion was <1%（linear load;<5%（Nonlinear load）,Output power factor was PF = 1,Output waveform was P

santak UPS PT10KS31 10kVA/10kWOnline (dual conversion)

santak UPS PT10KS31,is a kind of Uninterruptible power systemproducts.Its topology was High frequency UPS,Online (dual conversion),Long lasting model (external battery),Single phase input, single-phase output&three-phase input, single-phase output,Its installation method was Vertical/Tower/Horizontal/rack mounted,It belongs to SANTAK PT3000 series PT1-20K.Its rated capacity and maximum load power was 10kVA/10kW,Input method was Single phase two-wire+grounded (L+N+PE)/three-phase five wire (L1/L2/L3/N/G).Rated voltage was Single phase220V/230V/240V，three-phase380V/400V/415V.Input Voltage was Single phase110VAC~275VAC，three-phase191VAC~476VAC,Input frequency was 40~70Hz,THDI was < 3% Nonlinear full load,Input power factor was ≥ 0.99,Bypass voltage was Single phase110VAC~275VAC，three-phase191VAC~476VAC,Output voltage was 220V/230V/240V,Output accuracy was ± 1 %,Output Connection was Output terminal block,Output frequency range (mains mode) was 46-54Hz,Output frequency range (battery mode)