santak Electricity specific ups Power UPS 10kVA/8000W DC110VThree phase input, single-phase output Online (dual conversion) Standard input/output isolation transformer
santak Electricity specific ups 10kVA/8000W Three phase input, single-phase output Online (dual conversion) Standard input/output isolation transformer,,DC rated input voltageDC110V,Rated input voltage for communicationAC380V±25%(Three-phase four-wire),apply toPower plant booster station, substation, enterprise step-down station, power plant discrete control system (DCS), power plant digital electro-hydraulic control system (DEH), power plant monitoring system, power plant microcomputer monitoring system, power plant system dispatch communication system
Buy Now
- Telephone：4001177032
- Email：19710409880@139.com
Product details
santak Electricity specific ups SPU1031L,is a kind of Power uninterruptible power systemproducts.Its topology was Online (dual conversion),Three phase input, single-phase output,Power UPS,It belongs to SANTAK Power UPS SPU Series (1-20KVA).Its rated capacity and maximum loadable power was 10kVA/8000W,Input DC voltage was DC110V,Input DC voltage range was DC110V（rated）DC90~DC135V.Input AC voltage was AC380V±25%(Three-phase four-wire).Input frequency was 50HZ/60HZ±10%,Output voltage was AC220V±1%(Single phase 2-wire),Output frequency was 50HZ/60HZ±0.5%.Transient response:＜80ms,Output waveform was sine wave,Output waveform distortion rate was <3%（linear load），<5%（Nonlinear load）,Output Power Factor was PF=0.8,Overload capacity:105%~125%10min或 125%~150%60s Switch to bypass output,≥150% 1 s Switch to bypass output,.Output peak factor was 3：1,Efficiency:＞85%,Standard input/output isolation transformer.Transformer was Input/output fully external,Conversion time:Switching time between AC power supply and DC power supply is 0ms; switching time between bypass output and inverter output ＜4ms,Electromagnetic anti-interference/compatibility:DL/T 1074-2019 GB/T 7260.2-2009 EN50091-2 Approved(Optional filter）,Battery protection:Battery low voltage automatic shutdown, switch and battery high voltage alarm,Installation method:Horizontal/rack mounted,Rack mounted installation height：6U,Display:LCD/LED displays Chinese display screen, device status, input/output voltage, input/output frequency, battery voltage, load power, historical data.Operation temperature:-10℃~+40℃,Operation Humidity:0~95%，No condensation,UPS Dimensions:483*526*267(6U)mm (W*D*H),UPS Net weight:28KG,Noise:≤50dB (Front less than 1 meter）,Altitude:≤1000m（No reduction in amount）.Communication interface:Standard RS485 interface (MODBUS protocol), dry contacts (standard 7 sets), optional RS232,Parallel support Up to 2 parallel machines (with optional parallel components).Application scenarios:Power plant booster station, substation, enterprise step-down station, power plant discrete control system (DCS), power plant digital electro-hydraulic control system (DEH), power plant monitoring system, power plant microcomputer monitoring system, power plant system dispatch communication systemProduct Features
- Power level super isolation design: Input/output is completely electrically isolated to prevent DC system leakage interference and ensure relay protection safety.
- Pure sine wave output: SPWM control technology, pure output waveform, suitable for precision power automation equipment.
- Intelligent monitoring management: MCU intelligent control+Chinese and English LCD interface, supporting remote RS485/SNMP protocol monitoring.
- Redundant parallel technology: master-slave adaptive parallel+N+1 redundancy, multi machine collaborative guarantee system high availability.
- Adaptation to harsh environments: wide temperature range（-25℃~55℃）, dust-proof, anti vibration design, compatible with impact/nonlinear loads.
- Quick maintenance architecture: modular design, average fault repair time<0.5 hours, supports hot swappable replacement.
- Wide input compatibility: Ultra wide AC input voltage range, suitable for areas with unstable voltage and generator power supply.
- Electricity Standard Certification: Compliant with DL/T5491 and DL/T1074 standards, specially customized for power plants and substations.
Application Scenarios
- Power plant booster station, substation, enterprise step-down station, power plant discrete control system (DCS), power plant digital electro-hydraulic control system (DEH), power plant monitoring system, power plant microcomputer monitoring system, power plant system dispatch communication system
Product Parameters
- Brand：SANTAK
- Product-type：Power uninterruptible power system
- Series：SANTAK Power UPS SPU Series (1-20KVA)
- Topology：Online (dual conversion)
- System：Three phase input, single-phase output
- Product Category：Power UPS
- Model：SPU1031L
- Load power(max)：10kVA/8000W
- Input DC voltage：DC110V
- Input DC voltage range：DC110V（rated）DC90~DC135V
- Input AC voltage：AC380V±25%(Three-phase four-wire)
- Input frequency：50HZ/60HZ±10%
- Output voltage：AC220V±1%(Single phase 2-wire)
- Output frequency：50HZ/60HZ±0.5%
- Transient response：＜80ms
- Output waveform：sine wave
- Output waveform distortion rate：<3%（linear load），<5%（Nonlinear load）
- Overload capacity：105%~125%10min或 125%~150%60s Switch to bypass output,≥150% 1 s Switch to bypass output,
- Output Power Factor：PF=0.8
- Output peak factor：3：1
- Efficiency：＞85%
- Transformer：Standard input/output isolation transformer
- Installation position of transformer：Input/output fully external
- Conversion time：Switching time between AC power supply and DC power supply is 0ms; switching time between bypass output and inverter output ＜4ms
- Electromagnetic anti-interference/compatibility：DL/T 1074-2019 GB/T 7260.2-2009 EN50091-2 Approved(Optional filter）
- Battery protection：Battery low voltage automatic shutdown, switch and battery high voltage alarm
- Parallel support：Up to 2 parallel machines (with optional parallel components)
- Display：LCD/LED displays Chinese display screen, device status, input/output voltage, input/output frequency, battery voltage, load power, historical data
- Communication interface：Standard RS485 interface (MODBUS protocol), dry contacts (standard 7 sets), optional RS232
- Operation temperature：-10℃~+40℃
- Operation Humidity：0~95%，No condensation
- Noise：≤50dB (Front less than 1 meter）
- Altitude：≤1000m（No reduction in amount）
- Installation method：Horizontal/rack mounted
- Rack mounted installation height：6U
- UPS Dimensions(W×D×H)(mm)：483*526*267(6U)
- UPS Net weight(kg)：28
- Note-1：Equipment customization has strong flexibility and can meet the customization of various application environments and functions worldwide
- Note-2：UPS belongs to high leakage current equipment, and circuit breakers with leakage current protection are not allowed to be configured in the front end of UPS.
