Data Center Air Conditioning Systems 20kW（return air24℃，RH50%） Air cooled direct expansion Cooling Only5500m³/h @100Pa;
Data Center Air Conditioning Systems,20kW（return air24℃，RH50%）,Air cooled direct expansion,Cooling Only,Air supply volume5500m³/h @100Pa;EC centrifugal fan,Certified as compliantCCC、CQC、CRAA
Buy Now
- Telephone：4001177032
- Email：19710409880@139.com
Product details
SANTAK Data Center Air Conditioning Systems SCC020UPE2,is a kind of Precision air conditioner and humidification systemsproducts.,It belongs to SANTAK Castle (SCC)Series Fully variable frequency small precision air conditioner7.5-20kW.Power input was 380/3p/50hz,Product Category was Air cooled direct expansion,Cooling method was Cooling Only,Air supply mode:Step forward and provide air supply,Total cooling capacity:20kW（return air24℃，RH50%）,Apparent cooling capacity was 18.09kW（return air24℃，RH50%）,Sensible heat ratio was 0.9,Air supply volume：5500m³/h @100Pa;,Refrigeration tube was 30/60m（Standard parts/with extension components）,Indoor and outdoor unit height difference was 20/-5m,Refrigerant was R410A,Standard pipe diameter:28/22（Tracheal/liquid tube）(mm),Indoor unit Dimensions:800*650*1800mm（W*D*H),Expansion valve type:Electronic expansion valve,Compressor brand:Copeland,Compressor number:1,Compressor type was Variable frequency rotary compressor,Compressor power was -,Fan brand was ZIEHL-ABEGG,Fan number：1,Fan type:EC centrifugal fan,Wind turbine input power was 1.58kW,Air filter screen was G4,Electric heating type was PTC,Heating capacity was 3kW,Number of heater stages was 1,Humidification amount was 3kg/hr,Humidification type was wet film,Humidification inlet pipe threaded interface wasG1/2"internal thread,Display screen size was 7-inch LED touch screen,Number of parallel machines was 32,Communication port was RS485,Noise was 68dB(A) @1m,Evaporator form:A/V,Heat exchanger treatment was hydrophilic aluminum foil,Net weight:168/174kg,Outdoor unit model was CS022E,Power input was 220V/1P/50HZ,Power input method was Follow indoor unit,Number of outdoor units per unit:1,Heat exchanger treatment was acrylic resin,Maximum ambient temperature was 47℃,Minimum supported ambient temperature:-15℃/-35℃ (standard/low temperature components),Fan type:AC axial flow fan,Fan drive mode:Standard speed regulator,Noise:64dB(A),Net weight:74kg,Distribution parameter:21.8ASingle cooling type,Recommended Circuit Breaker:,Recommended cables:4*6.0mm²+1*6.0mm²,Function include Standard configuration for standby, cooling, humidification, heating, dehumidification, cooling humidification, dehumidification heating, and heating humidification units: water leakage detection, sight glass, dry filter, phase sequence protection function, fan airflow loss alarm, filter screen dirt blockage alarm, automatic power on/off, group control, liquid circuit solenoid valve (the unit does not come with fan sinking components and needs to be purchased separately),Optional Accessories include Low temperature component/extension component/5m copper pipe installation package,Pipe routing method was Lower takeover+later takeover,Drainage pipe diameter was Condensate drain pipe：outside diameter25mm，inside diameter19mm,Certification:CCC、CQC、CRAA,Warranty was 3 Years,Application scenarios include Computer room, equipment room, wiring room, UPS room, enterprise computer room, data room, medium and large data center, rail transit station computer room, laboratory, testing room, constant temperature and humidity storage roomProduct Features
- Full frequency conversion energy-saving technology: DC variable frequency compressor+EC fan, CQC first level energy efficiency, energy-saving by more than 30%.
- Precise environmental control: electronic expansion valve+high air volume design, temperature control ± 1 ℃, humidity ± 5%, sensible heat ratio 0.95+.
- Extremely wide temperature range operation: standard configuration -15℃~45℃operation, optional low-temperature components support -35 ℃ severe cold environment.
- Intelligent operation and maintenance management: 7-inch touch screen+RS-485 group control, supporting remote monitoring and self diagnosis.
- Quick installation and deployment: Pre charged R410A refrigerant+quick interface, no welding required, installation efficiency increased by 50%.
- Flexible structural design: optional front and rear/lower pipes, integrated air cap, suitable for compact computer room layout.
- Industrial grade reliability: Equipped with oil protection as standard, the compressor has a lifespan of over 80000 hours and operates continuously 24/365.
- Full certification warranty: CCC/CQC/CRAA certification, original factory three-year warranty, lifelong maintenance of key components.
Application Scenarios
- Computer room, equipment room, wiring room, UPS room, enterprise computer room, data room, medium and large data center, rail transit station computer room, laboratory, testing room, constant temperature and humidity storage room
Product Parameters
- Brand：SANTAK
- Product-type：Precision air conditioner and humidification systems
- Series：SANTAK Castle (SCC)Series Fully variable frequency small precision air conditioner7.5-20kW
- Model：SCC020UPE2
- Power input：380/3p/50hz
- Product Category：Air cooled direct expansion
- Cooling method：Cooling Only
- Air supply mode：Step forward and provide air supply
- Total cooling capacity：20kW（return air24℃，RH50%）
- Apparent cooling capacity：18.09kW（return air24℃，RH50%）
- Sensible heat ratio：0.9
- Air supply volume（m³/h @100Pa）：5500m³/h @100Pa;
- Refrigeration tube：30/60m（Standard parts/with extension components）
- Indoor and outdoor unit height difference：20/-5m
- Refrigerant：R410A
- Standard pipe diameter：28/22（Tracheal/liquid tube）(mm)
- Indoor unit Dimensions(W×D×H)(mm)：800*650*1800
- Expansion valve type：Electronic expansion valve
- Compressor brand：Copeland
- Compressor number：1
- Compressor type：Variable frequency rotary compressor
- Compressor power：-
- Fan brand：ZIEHL-ABEGG
- Fan number：1
- Fan type：EC centrifugal fan
- Wind turbine input power：1.58kW
- Air filter screen：G4
- Electric heating type：PTC
- Heating capacity：3kW
- Number of heater stages：1
- Humidification amount：3kg/hr
- Humidification type：wet film
- Humidification inlet pipe threaded interface：G1/2"internal thread
- Display screen size：7-inch LED touch screen
- Number of parallel machines：32
- Communication port：RS485
- Noise dB (A) (1-meter free field)：68dB(A) @1m
- Evaporator form：A/V
- Heat exchanger treatment：hydrophilic aluminum foil
- Net weight：168/174kg
- Outdoor unit model：CS022E
- Power input：220V/1P/50HZ
- Power input method：Follow indoor unit
- Number of outdoor units per unit：1
- Heat exchanger treatment：acrylic resin
- Outdoor unit Dimensions(W×D×H)(mm)：1020*405*1373
- Maximum ambient temperature：47℃
- Minimum supported ambient temperature：-15℃/-35℃ (standard/low temperature components)
- Fan type：AC axial flow fan
- Fan drive mode：Standard speed regulator
- Noise：64dB(A)
- Net weight：74kg
- Distribution parameter FLA：21.8ASingle cooling type
- Recommended Circuit Breaker：
- Recommended cables：4*6.0mm²+1*6.0mm²
- Function：Standard configuration for standby, cooling, humidification, heating, dehumidification, cooling humidification, dehumidification heating, and heating humidification units: water leakage detection, sight glass, dry filter, phase sequence protection function, fan airflow loss alarm, filter screen dirt blockage alarm, automatic power on/off, group control, liquid circuit solenoid valve (the unit does not come with fan sinking components and needs to be purchased separately)
- Optional Accessories：Low temperature component/extension component/5m copper pipe installation package
- Pipe routing method：Lower takeover+later takeover
- Drainage pipe diameter：Condensate drain pipe：outside diameter25mm，inside diameter19mm
- Certification：CCC、CQC、CRAA
- Warranty：3 Years
- Note-1：When no hood is added, the indoor units for upper and lower air supply have the same size; The hood component of the upper air supply fan model is an optional accessory, with a standard height of 412mm
- Note-2：If the outdoor ambient temperature is below minus 15 degrees, a low-temperature kit needs to be selected. If the equivalent pipe length between indoor and outdoor units is greater than 30m, a matching extension component needs to be selected
