SANTAK modular Air Conditioning Systems SCC025UPE1 25.5kW（return air24℃，RH50%） Air cooled direct expansion Constant temperature and humidity7800m³/h @100Pa;8500m³/h @20Pa;
SANTAK modular Air Conditioning Systems,SCC025UPE1,25.5kW（return air24℃，RH50%）,Air cooled direct expansion,Constant temperature and humidity,Air supply volume7800m³/h @100Pa;8500m³/h @20Pa;EC centrifugal fan,Certified as compliantCCC、CQC、CRAA
Buy Now
- Telephone：4001177032
- Email：19710409880@139.com
Product details
SANTAK modular Air Conditioning Systems SCC025UPE1,is a kind of Precision air conditioner and humidification systemsproducts.,It belongs to SANTAK Castle(SCC)Series High efficiency computer room dedicated air conditioning 25-100kW.Power input was 380/3p/50hz,Product Category was Air cooled direct expansion,Cooling method was Constant temperature and humidity,Air supply mode:Upward air supply (optional hood),Total cooling capacity:25.5kW（return air24℃，RH50%）,Apparent cooling capacity was 23kW（return air24℃，RH50%）,Sensible heat ratio was 0.9,Air supply volume：7800m³/h @100Pa;8500m³/h @20Pa;,Refrigeration tube was 30/60m（Standard parts/with extension components）,Indoor and outdoor unit height difference was 20/-5m,Refrigerant was R410A,Standard pipe diameter:22/16（Tracheal/liquid tube）(mm),Indoor unit Dimensions:780*996*1975mm（W*D*H),Expansion valve type:Electronic expansion valve,Compressor brand:Copeland,Compressor number:1,Compressor type was Fixed frequency vortex,Compressor power was 6.9kW,Fan brand was ZIEHL-ABEGG,Fan number：1,Fan type:EC centrifugal fan,Wind turbine input power was 1.3kW,Air filter screen was G4,Electric heating type was PTC,Heating capacity was 6kW,Number of heater stages was 2,Humidification amount was 5kg/hr,Humidification type was electrode,Humidification inlet pipe threaded interface wasG1/2"internal thread,Display screen size was 7-inch LED touch screen,Number of parallel machines was 32,Communication port was RS485,Noise was 66dB(A) @1m,Evaporator form:/,Heat exchanger treatment was hydrophilic aluminum foil,Net weight:270kg,Outdoor unit model was CS050E,Power input was 380V/3P/50HZ,Power input method was Follow indoor unit,Number of outdoor units per unit:1,Heat exchanger treatment was acrylic resin,Maximum ambient temperature was 45℃,Minimum supported ambient temperature:-15℃/-35℃ (standard/low temperature components),Fan type:AC axial flow fan,Fan drive mode:Standard speed regulator,Noise:64dB(A),Net weight:145kg,Distribution parameter:40.5AConstant temperature and humidity type,Recommended Circuit Breaker:50A,Recommended cables:4*10.0mm²+1*10.0mm²,Function include Standard configuration for standby, cooling, humidification, heating, dehumidification, cooling humidification, dehumidification heating, and heating humidification units: water leakage detection, sight glass, dry filter, phase sequence protection function, fan airflow loss alarm, filter screen dirt blockage alarm, automatic power on/off, group control, liquid circuit solenoid valve (the unit does not come with fan sinking components and needs to be purchased separately),Optional Accessories include Wind cap/low-temperature component/extension component,Pipe routing method was Lower takeover/side takeover,Drainage pipe diameter was outside diameter22mm，inside diameter19mm,Certification:CCC、CQC、CRAA,Warranty was 3 Years,Application scenarios include Computer room, equipment room, wiring room, UPS room, enterprise computer room, data room, medium and large data center, rail transit station computer room, laboratory, testing room, constant temperature and humidity storage roomProduct Features
- Efficient and energy-saving design: valley wheel vortex compressor+EC centrifugal fan, industry-leading COP, sensible heat ratio 0.95+.
- Accurate environmental control: temperature deviation ± 1 ℃, humidity deviation ± 5%, suitable for the constant temperature and humidity requirements of precision equipment.
- Climate adaptability: The corrosion-resistant condenser supports operation at-35℃~45℃, providing stable cooling in extremely cold northern environments.
- Intelligent operation and maintenance management: 7-inch touch screen+RS-485 interface, remote monitoring, fault self diagnosis, and one click parameter setting.
- Environmentally friendly refrigerant technology: R410A refrigerant, with zero ozone depletion index (ODP), meets green and low-carbon standards.
- Flexible configuration scheme: optional power range of 25-100kW, supporting up/down air supply, and expanding components to adapt to multiple scenarios.
- Industrial grade reliability: 24 × 365 all-weather operation, IP54 protection level, standard anti liquid impact and anti voltage fluctuation protection.
- Long term warranty service: Original factory three-year nationwide warranty, key components (compressor/fan) have a lifespan of over 100000 hours.
Application Scenarios
- Computer room, equipment room, wiring room, UPS room, enterprise computer room, data room, medium and large data center, rail transit station computer room, laboratory, testing room, constant temperature and humidity storage room
Product Parameters
- Brand：SANTAK
- Product-type：Precision air conditioner and humidification systems
- Series：SANTAK Castle(SCC)Series High efficiency computer room dedicated air conditioning 25-100kW
- Model：SCC025UPE1
- Power input：380/3p/50hz
- Product Category：Air cooled direct expansion
- Cooling method：Constant temperature and humidity
- Air supply mode：Upward air supply (optional hood)
- Total cooling capacity：25.5kW（return air24℃，RH50%）
- Apparent cooling capacity：23kW（return air24℃，RH50%）
- Sensible heat ratio：0.9
- Air supply volume（m³/h @100Pa）：7800m³/h @100Pa;8500m³/h @20Pa;
- Refrigeration tube：30/60m（Standard parts/with extension components）
- Indoor and outdoor unit height difference：20/-5m
- Refrigerant：R410A
- Standard pipe diameter：22/16（Tracheal/liquid tube）(mm)
- Indoor unit Dimensions(W×D×H)(mm)：780*996*1975
- Expansion valve type：Electronic expansion valve
- Compressor brand：Copeland
- Compressor number：1
- Compressor type：Fixed frequency vortex
- Compressor power：6.9kW
- Fan brand：ZIEHL-ABEGG
- Fan number：1
- Fan type：EC centrifugal fan
- Wind turbine input power：1.3kW
- Air filter screen：G4
- Electric heating type：PTC
- Heating capacity：6kW
- Number of heater stages：2
- Humidification amount：5kg/hr
- Humidification type：electrode
- Humidification inlet pipe threaded interface：G1/2"internal thread
- Display screen size：7-inch LED touch screen
- Number of parallel machines：32
- Communication port：RS485
- Noise dB (A) (1-meter free field)：66dB(A) @1m
- Evaporator form：/
- Heat exchanger treatment：hydrophilic aluminum foil
- Net weight：270kg
- Outdoor unit model：CS050E
- Power input：380V/3P/50HZ
- Power input method：Follow indoor unit
- Number of outdoor units per unit：1
- Heat exchanger treatment：acrylic resin
- Outdoor unit Dimensions(W×D×H)(mm)：1146*817*1216
- Maximum ambient temperature：45℃
- Minimum supported ambient temperature：-15℃/-35℃ (standard/low temperature components)
- Fan type：AC axial flow fan
- Fan drive mode：Standard speed regulator
- Noise：64dB(A)
- Net weight：145kg
- Distribution parameter FLA：40.5AConstant temperature and humidity type
- Recommended Circuit Breaker：50A
- Recommended cables：4*10.0mm²+1*10.0mm²
- Function：Standard configuration for standby, cooling, humidification, heating, dehumidification, cooling humidification, dehumidification heating, and heating humidification units: water leakage detection, sight glass, dry filter, phase sequence protection function, fan airflow loss alarm, filter screen dirt blockage alarm, automatic power on/off, group control, liquid circuit solenoid valve (the unit does not come with fan sinking components and needs to be purchased separately)
- Optional Accessories：Wind cap/low-temperature component/extension component
- Pipe routing method：Lower takeover/side takeover
- Drainage pipe diameter：outside diameter22mm，inside diameter19mm
- Certification：CCC、CQC、CRAA
- Warranty：3 Years
- Note-1：When no hood is added, the indoor units for upper and lower air supply have the same size; The hood component of the upper air supply fan model is an optional accessory, with a standard height of 412mm
- Note-2：If the outdoor ambient temperature is below minus 15 degrees, a low-temperature kit needs to be selected. If the equivalent pipe length between indoor and outdoor units is greater than 30m, a matching extension component needs to be selected
